Take you to understand the mid-end probe station and its corresponding technical parameters
2024-03-045314
Take you to understand the mid-end probe station and its corresponding technical parameters
The mid-end probe station includes multiple models, with the CL-6 series being the most typical. The CL-6 series mid-end probe station comes in three sizes: 4-inch, 6-inch, and 8-inch, suitable for testing samples of different sizes.
The technical parameters of the CL-6 series mid-end probe station mainly include the following aspects:
Table size: The table size is 4 inches, 6 inches, or 8 inches, and can be selected according to your needs.
Horizontal rotation: The table can rotate 360 degrees, with a fine adjustment range of 15 degrees and an accuracy of 0.1 degree, and comes with an angle locking device to ensure stability during testing.
X-Y travel: The X-Y axis travel is 4 inches x 4 inches or 6 inches x 6 inches, and the appropriate travel range can be selected according to needs.
X-Y movement accuracy: The X-Y axis movement accuracy is 10 microns or 1 micron, and the appropriate accuracy level can be selected according to requirements.
Adjustment of the Z axis of the sample table: The sample table can be raised or lowered by 10mm, making it easy to adjust the height of the sample.
Sample fixation: The sample table uses vacuum adsorption, central hole adsorption, or multi-ring adsorption to fix the sample, ensuring the stability of the sample during the testing process.
Needle base platform: The U-shaped needle base platform can accommodate up to 6 probe bases, facilitating multi-point testing.
Back electrode test: The sample stage is electrically independent and can be tested by connecting the back electrode through a 4mm jack.
In addition, the CL-6 series mid-end probe station also has a variety of optical system configurations to choose from, including single-barrel microscope, body microscope, metallurgical microscope, etc., with magnification ranging from 16X to 4000X. The user can choose the appropriate microscope type and magnification according to their needs.
It should be noted that the above technical parameters are only typical configurations for the CL-6 series mid-range probe stations, and actual parameters may vary depending on specific models and user requirements. Therefore, when selecting a probe station, it is recommended to choose the appropriate model and technical parameters based on specific application needs and testing requirements.
